Learning Center Library Contents

Down Arrow
open
Welcome Guest
Aviation Learning Center Document How to Avoid a Mid Air Collision - P-8740-51
Author: Federal Aviation Administration Date: Unknown
used for alignment
used for alignment
Viewing Options: View Document as Chapters Chaptersused for alignment View Full Document Full Documentused for alignment View Print-Friendly Document Printer Friendlyused for alignment Search Inside this Document Search Insideused for alignment

< Previous Chapter used for alignment Next Chapter > used for alignment

Midair Collision Causes
used for alignment

What causes in-flight collisions? Undoubtedly, increasing traffic and higher closing speeds represent potential. For instance, a jet and a light twin have a closing speed of about 750 mph. It takes a minimum of 10 seconds, says the FAA. for a pilot to spot traffic, identify it, realize it is a collision threat, react, and have the aircraft respond. But two planes converging at 750 mph will be less than 10 seconds apart when the pilots are first to detect each other!

These are all causal factors, but the reason most often noted in the statistics reads: "Failure of pilot to see other aircraft," which means that the see-and-avoid system broke down. In most cases, at least one of the pilots involved could have seen the other in time to avoid contact, if he or she had just been using the visual senses properly. In sum, it is really that complex, vulnerable little organ - the human eye- which is the leading cause of inflight collisions.

Let's take a look at how its limitations affect your flight.

used for alignment